Diagnose my Python/Scapy errors anyone?

Diagnose my Python/Scapy errors anyone? - Programming On Unix

Users browsing this thread: 1 Guest(s)

	Derby Offline \| 28-08-2013, 01:18 PM \| #1

Had trouble with my Debian partition so thought it would be best to make the inevitable change to Kali (I know, no one will think this is a good idea but I mainly use Linux for pen testing anyway)

Anyway, I am attempting IPv6 packets on Scapy with a very basic script so far it gives the same error if I run through the commands in the Scapy interface as if I run the Python code.

The code I get is as follows:

Code:
import logging

import sys

from scapy.all import *

conf.iface='eth0'

conf.route6.add(dst="fe80::60c:ceff:fee2:d4fe", gw="fe80::21f:c6ff:fe5d:8a38")

print conf.route6

i=IPv6()

i.dst="fe80::60c:ceff:fee2:d4fe"

i.src="fe80::21f:c6ff:fe5d:8a38"

i.display()

q=ICMPv6EchoRequest(data = "lol")

q.display()

p=(i/q)

reply=sr1(p)

reply.show()

The errors I get are as follows:

Code:
WARNING: No route found for IPv6 destination :: (no default route?)

Destination                   Next Hop                  iface  src candidates          

fe80::/64                     ::                        eth0   fe80::21f:c6ff:fe5d:8a38

::1/128                       ::                        lo     ::1                     

fe80::21f:c6ff:fe5d:8a38/128  ::                        lo     ::1                     

fe80::60c:ceff:fee2:d4fe/128  fe80::21f:c6ff:fe5d:8a38  lo     :, :, 1                 

###[ IPv6 ]###

  version   = 6

  tc        = 0

  fl        = 0

  plen      = None

  nh        = No Next Header

  hlim      = 64

  src       = fe80::21f:c6ff:fe5d:8a38

  dst       = fe80::60c:ceff:fee2:d4fe

###[ ICMPv6 Echo Request ]###

  type      = Echo Request

  code      = 0

  cksum     = None

  id        = 0x0

  seq       = 0x0

  data      = 'lol'

Begin emission:

ERROR: --- Error in child 10355

Traceback (most recent call last):

  File "/usr/local/lib/python2.7/dist-packages/scapy/sendrecv.py", line 89, in sndrcv

    pks.send(p)

  File "/usr/local/lib/python2.7/dist-packages/scapy/arch/linux.py", line 375, in send

    iff,a,gw  = x.route()

  File "/usr/local/lib/python2.7/dist-packages/scapy/layers/inet6.py", line 356, in route

    return conf.route6.route(dst)

  File "/usr/local/lib/python2.7/dist-packages/scapy/route6.py", line 232, in route

    srcaddr = get_source_addr_from_candidate_set(dst, p[1][1])

  File "/usr/local/lib/python2.7/dist-packages/scapy/utils6.py", line 144, in get_source_addr_from_candidate_set

    candidate_set.sort(cmp=rfc3484_cmp, reverse=True)

AttributeError: 'str' object has no attribute 'sort'

I am running rather late on the thesis the Scapy code implementation will be for (I have a week to implement, document, evaluate and conclude) so if ANYONE has suggestions as to how to remedy this I will be eternally grateful.

If anymore information is needed I'll be happy to provide.

Thanks,

Lux

	Derby Offline \| 28-08-2013, 04:42 PM \| #2

These errors have been fixed.

However, the code now fails often with a time out which I'm guessing is ICMPv6 rate limiting.

If anyone could hazard a better guess as to the problem or knows how to disable rate limiting on any OS it would be helpful!

	venam Offline \| 29-08-2013, 03:59 AM \| #3

If you are on Linux you might want to take a look at /proc/sys/net/ipv6/ .

	Derby Offline \| 29-08-2013, 08:29 AM \| #4

One target OS and the source is Linux, will have a little look at that, thanks!

	Derby Offline \| 29-08-2013, 01:36 PM \| #5

I'm sorry in my haste to push forward I hadn't mentioned here that the issue was using WLAN and through using ethernet I've managed to fixed the issue of not getting responses.

View a Printable Version